Product Selection Chart

• Heat Shrink Tubing
  • Single Wall
  • Dual Wall
  • Heavy Duty
  • Special Purpose
• Heat Shrink Molded Parts
• Non-Heat Shrink Tubing
• Braided Sleeving
• Single Wall
• Wire and Cable
• Solder Sleeves and Devices
• Cable Ties
• Marking Systems
• Adhesive Systems
• 

---

Heat Shrink Tubing

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Single Wall
Polyolefin
Versafit	highly flame retardant, very flexible, low shrink temperature	-55 to 135	2:1	.046 to 4.00	23053/5, Cl. 1 & 3; UL/CSA VW-1	Insulates and protects wire bundles, strain relief for electrical wire connections and Identifies or color codes wires, cables and terminals.
RNF-100	flexible, flame retardant, general purpose, superior abrasion and solvent resistance	-55 to 135	2:1	.046 to 5.00	23053/5, Cl. 1 & 2; UL/CSA	Superior mechanical (abrasion, cut-through and strain relief), thermal and fluid resistance. Used on wire terminations and connections, jacketing wire bundles harnesses.
Versafit V4	very thin wall, very flexible, highly flame retardant	-30 to 125	2:1	.046 to 1.00	UL/CSA VW-1	Very thin wall tubing good protection for temperature sensitive components. Low shrink temp improves production efficiency.
CGPE-105	non-flame retardant, shiny finish, commercial grade	-70 to 105	2:1	.046 to 2.00		Brightly colored polyolefin, makes a good identifier for components. Hot stamps extremely well, clear provides excellent clarity for printing underneath tubing
RNF-3000	flexible, high shrink ratio, flame retardant, general purpose	-55 to 135	3:1	.060 to 1.534	UL/CSA	High shrink ratio, conforms to wide range of shapes. Excellent for repair of cable and wiring harnesses, protection of inline splices, excellent strain relief. Great physical chemical and electrical properties flame retardant in colors
RP-4800	flexible, high shrink ratio, flame retardant	-55 to 135	4:1	.750 to 4.50	23053/5, Cl. 1 Overexpanded; UL	High shrink ratio, conforms to irregular shapes, great for protection and strain relief on harness applications. High shrink ratio allows for a few sizes to be used for a wide variety of projects.
DCPT	flexible, flame retardant, dual color (green/yellow)	-55 to 135	2:1	.118 to 1.50	UL/CSA	Dual colors for instant identification, flexible, color performance exceeds std. Ink marking. Commonly used to identify ground wires and cables, good flexibility makes this tubing easy to work with.
RT-3	semi-rigid, flame retardant	-55 to 135	2.5:1	.240 to .485	UL/CSA	Excellent mechanical properties, extremely good strain relief, tightly controlled expanded size promotes accurate automation processes
CRN	semi-rigid, flame retardant	-55 to 135	2:1	.046 to .750	UL/CSA (Black only)	High abrasion resistance, good strain relief, excellent chemical and solvent resistance. Flame Retardant in colors.
PVC
HS 105	flexible, flame retardant, excellent UV stability. Resists chemicals, grease and oils.	-30 to 105	2:1	.046 to 4.00	UL/CSA VW-1	Shrinks quickly at 100°C and protects sensitive substrates and adjacent components. Used on wire harnesses and to insulate wire splices. Excellent for outdoor applications or ones requiring resistance to chemicals and oils.
LAYFLAT	very thin wall, flame retardant	-15 to 100	45%	.087 to 7.50	UL on select grades	Applications include insulation and jacketing of batteries and capacitors. Also used as tamper evident sealing in the pharmaceutical industry.
PTFE & FEP
PTFE	semi-rigid, flame retardant, high temperature, excellent chemical and solvent resistance	-75 to 250	2:1 & 4:1	.034 to 4.00	23053/12; UL/CSA. USP Class VI	Due to PTFE having wide operating temperature range and being chemically inert and biocompatible, it is commonly designed into medical devices and high temperature industrial equipment.
FEP	semi-rigid, flame retardant, high temperature, excellent chemical and solvent resistance	-75 to 200	1.3:1 & 1.6:1	.031 to 2.00	23053/11; UL/CSA, USP Class VI	With similar features to PTFE, FEP is used in medical devices, industrial equipment, temperature probes and food processing roller covers.

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Dual Wall
Polyolefin
ATUM	high shrink ratio, adhesive lined	-55 to 110	3:1 & 4:1	.118 to 1.57	23053/4, Cl. 3	High shrink ratio, medium wall provides improved mechanical protection. Good for cable repair, sealing components from moisture, strain relief, protection of inline splices, harness applications.
DWP-125	flexible, high shrink ratio, adhesive lined	-40 to 110	3:1	.125 to 2.00	UL/CSA	Ideal for applications where a UL recognized / CSA certified adhesive lined tubing is required. Sealing and protection of wire splices, break-outs and connector to cable transitions.
ES1000	clear, semi-rigid, high shrink ratio, adhesive lined	-40 to 130	4:1	.225 to .700	UL	Specially designed for environmental sealing and electrical insulation of wire splices, terminations and components where see-through inspection is required.
ES2000	semi-rigid, high shrink ratio, adhesive lined, flame retardant	-40 to 130	4:1	.225 to .700	UL	Specially designed for environmental sealing and electrical insulation of wire splices, terminations and components.
SCL	semi-rigid, high shrink ratio, encapsulant lined	-55 to 110	3:1	.125 to 1.00	23053/4, Cl. 1; UL	Encapsulation of components, splices and terminations where splash resistance and mechanical protection are required. Excellent against abrasion, vibration and over flexing.
SCT	semi-rigid, high shrink ratio, adhesive lined, flame retardant, high temperature	-40 to 150	4:1	.300 to .700	SCT SCD	Designed for insulation, strain relief and sealing of automotive wire splices and components in an under hood automotive environment. Specially formulated to function at an extended temperature range.
TAT-125	flexible, adhesive lined	-55 to 110	2:1	.125 to 4.00	23053/4, Cl. 2; UL	Sealing and protection of simple in-line splices, bimetallic joints and components from fluids, moisture and corrosion. Repair damaged wire insulation, especially where flexibility is required.

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Heavy Duty
Polyolefin
BSTS / BSTS-FR	rugged, thick wall, general purpose	-55 to 90	3:1	.300 to 4.50	FR is flame-retardant	Used in demanding applications where insulation, abrasion resistance and strain relief are required. Resists moisture, fungus and weathering.
HRHF	high ratio, durable heavy wall	-55 to 90	5.6:1	.600 to 4.00	RW-2013	Designed to accommodate large size differences between cable diameters and cable connectors and backshells to simplify cable repair and protection.
RHW	rugged, heavy wall, adhesive lined	-55 to 110	3:1	.354 to 7.087	UL	Insulation, protection and sealing of electrical connections and joints in low voltage cables. Combines maximum reliability and product performance with simplified installation,
RMW	medium wall, adhesive lined	-55 to 110	3:1	.394 to 7.087		Insulation and protection of cable joints as well as cable repair. Uncoated RMW provides insulationand starin relief. Adhesive lined RMW also provides an environmental seal.
SST / SST-FR	thick wall, adhesive lined	-55 to 90	3:1	.300 to 4.50	23053/15, Cl. 1 & 2	Insulation, strain relief and sealing of splices in wire harnesses. Thick adhesive liner provides environmental protection in wet or underground applications.

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Special Purpose
Elastomer
DR-25	flexible, chemical and abrasion resistant	-75 to 150	2:1	.125 to 3.00	23053/16	Resistance to aviation and diesel fuels along with hydraulic fluids. Particularily suitable as a jacketing material for cables and harnesses on military groung vehicles and race cars.
NT	flexible, general purpose, modified	-55 to 90	2:1	.125 to 4.00	UL/CSA	Insulation, strain relief and abrasion protection on cable harnesses and wire bundles in commercial electronics industries. Suitable for applications requiring some exposure to common fluids and solvents.
NT-MIL	flexible, rugged, modified	-70 to 121	2:1	.125 to 4.00	23053/1, Cl. 1 & 2	Insulation, strain relief and abrasion protection on cable harnesses and wire bundles in the military and aerospace industries. Applications requiring exposure to fluids and solvents.
NTFR	very flexible, rugged neoprene	-70 to 121	2:1	.125 to 3.00	SC-X-15112; AMS 3623	Harness applications for which fluid resistance, ruggedness and flexibility at low temperatures are important. Applications requiring exposure to fluids and solventsat elevated temperatures.
SFR	very flexible, flame retardant, silicone	-75 to 180	1.75:1	.250 to 2.00	23053/10; M46846, Type II, Cl. 1	Cable harness protection where maximum flexibility in temperature extremes is required. Strain relief for electronic components, semi-conductor leads and wire splices.
RW-200 (Viton)	flexible, chemical resistant, high temperature	-40 to 200	2:1	.125 to 2.00	23053/13	Insulation and protection of cables and components exposed to high temperatures and/or solvents, fuels, hydraulic fluids, lubricants and acids. Suitable for use in engine compartments.
Fluoropolymer
RNF-150	flexible, high performance, flame retardant	-55 to 150	2:1	.046 to 1.00	23053/18, Cl. 2; UL VW-1	Jacketing and bundling wires to form light duty harnesses, especially where a low profile, abrasion resistance and flexibility are needed. Insulation and strain relief of electrical connections and wire terminations.
RT-375	clear, flexible, flame resistant	-55 to 150	2:1	.046 to 2.00	23053/18, Cl. 2; UL/CSA VW-1	Protection of components and wire markers subject to extreme abuse while permitting full identification and inspection.
RT555	fluid resistant, chemical resistant, high temperature	-65 to 200	2:1	.125 to 2.00	UL	Applications requiring resistance to high temperatures and resistance to a variety of chemicals and fluids. Insulation and strain relief on appliances. Protection of delicate electronic instruments.
Medical
MT1000	USP Class VI, high temperature, semi-rigid fluoropolymer	-55 to 175	2:1	.063 to 1.00	USP Class VI	Insulation and strain relief of medical device components exposed to high temperatures either during operation or sterilization. Thin wall construction for applications with clearance constraints. Adhesive lined version also provides sealing.
MT2000	USP Class VI, lubricious, thin wall polyolefin	-40 to 105	2.5:1	.040 to .400	USP Class VI	Applications requiring lubricity, flexibility and excellent electrical insulation performance. A good alternative to FEP. Thin wall construction is well suited for applications with clearance constraints. Adhesive lined version also provides sealing.
MT3000	USP Class VI, high temperature, flexible fluoropolymer	-55 to 150	2:1	.063 to 1.00	USP Class VI	Insulation and strain relief of medical device components exposed to high temperatures either during operation or sterilization. Exceptional flexibility and thin wall construction provide pliancy and small overall wire bundle or electrosurgical tool.
MT5000	USP Class VI, flexible polyolefin	-70 to 105	2:1	.063 to 1.00	USP Class VI	Insulation of electrosurgical instruments. Protection against abrasion and fluids. Also used for strain relief, color coding and identification od medical components and devices.
PTFE	USP Class VI, very high temperature, semi-flexible, chemical resistant teflon	-250 to 260	2:1	#30 to 1"	23053/12, UL/CSA, USP Class VI	Due to PTFE having wide operating temperature range and being chemically inert and biocompatible, it is commonly designed into medical devices and high temperature industrial equipment.
FEP	USP Class VI, high temperature, semi-flexible, chemical resistant teflon	-200 to 204	1.6:1 & 1.3:1	#24 to 2"	23053/11, UL/CSA, USP Class VI	With similar features to PTFE, FEP is used in medical devices, industrial equipment and temperature probes.
Other
RW-175 (Kynar)	high temperature, chemical resistant polyvinylidene fluoride	-55 to 175	2:1	.046 to 1.50	23053/8; UL/CSA VW-1	Insulation and strain relief of delicate electrical connections and terminations. Offers high temperature performance, outstanding abrasion and cut through resistance, along with superior chemical and solvent resistance.
HFT5000	heat shrinkable fabric	-40 to 125	2:1	.472 to 2.756	UL	Abrasion protection for rubber hoses, plastic pipes and harness wire bundles. Provides outstanding abrasion, chafing and cut through protection even at high temperatures.

Heat Shrink Molded Parts

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Polyolefin	Boots, adaptors, transitions, end caps, feedthroughs & covers	-55 to 135	Various	Various	UL 224; Mil-I-81765/1	Designed for use in general harnessing applications where toughness is required and systems are occasionally exposed to fluids or heat. The adhesive lined parts provide excellent sealing ans strain relief at connector-cable terminations and transitions.
Fluoro-elastomer	Boots, adaptors, transitions, end caps, feedthroughs & covers	-55 to 200	Various	Various	Mil-I-81765/4	Used in conjuction with tubing made from RW-200 (Viton) or equivlent cable jackets. Provides excellent resistance to elevated temperatures and continuous fuel immersion.	O
Elastomer	Boots, adaptors, transitions, end caps, feedthroughs & covers	-75 to 150	Various	Various	SC-X-15111	A high performance blend of polymers, this product has excellent fluid and temperature resistance. It is suitable for use in most areas of military vehicle harnessing.	O

Non-Heat Shrink Tubing

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
PVC
GL 105	flexible, flame retardant, lead free	-30 to 105	---	.022 to 2.50	M631, Grade C; ASTM D922; UL/CSA VW-1	A high temperature PVC designed for a wide range of electrical insulating applications. It is typically used as a wire harness covering or as terminal and splice insulation.
9848	flexible, general purpose automotive, lead free	-40 to 90	---	.022 to 1.50	ASTM D922, Grade A; Ford Spec ES-2U5A-1A263-AA	Used in automotive components , electric motors, recreational vehicles and a wide range of other wire harness applications.
631	flexible, general purpose, lead free	-50 to 80	---	.022 to 1.50	M631, Grade A & B	Typically used in appliances, automobiles, military wiring harnesses. Its low temperature characteristics make useful in aerospace, snow machines and electrical harnesses.
7444	flexible, low temperature, highly flame retardant, lead free	-68 to 60	---	.022 to 1.00	M7444, Type I & III, Class I & II	Excellent for applications which encounter very low temperatures such as aircraft, aeronautical devices, missiles and snow machine wiring harness jackets.
PTFE & FEP
PTFE	very high temperature, flexible, chemical resistant teflon	-250 to 260	---	#32 to 1-1/2"	UL/CSA, USP  Class VI, Mil-I-22129, AMS 3653, AMS 3655	Outstanding chemical and temperature resistance, coupled with fluoropolymers low coefficient of friction, makes PTFE tubing excellent choice for applications that come in contact with chemicals or temperature extremes.
FEP	high temperature, flexible, chemical resistant teflon	-200 to 204	---	#32 to 1-1/2"	UL/CSA, USP Class VI	With similar features to PTFE, FEP is used in medical devices, industrial equipment, temperature probes.

Braided Sleeving

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Braided Sleeving
HT-1220	braided fiberglass, heat treated, flame retardant, grade C-3	-70 to 600	---	.022 to 1.50	UL VW-1; MIL-Y-1140	Designed for applications to 1200°F where additional thermal insulation or mechanical protection is required. Ideal for heating element leads in toasters, irons, coffee makers and other appliances.
HTS-520	acrylic resin saturated fiberglass, fray resistant, flame retardant, grade C-3	-70 to 600	---	.022 to 1.50	UL VW-1; MIL-Y-1140	Good to 1200°F, HTS-520 is used in low voltage applications including: electrical appliance heating elements, lighting fixtures, wire harness and ignitor & component leads.
VG-130	vinyl coated fiberglass, good flexibility, flame retardant, grades A, B & C.	-20 to 130	---	.022 to 1.50	M3190/2; UL/CSA VW-1	Low temperature vinyl coated fiberglass is used for supplementary insulation on transformer, motor, generator and resistor leads. Other applications include radio, television and other electronic circuits.
AG-155	acrylic coated fiberglass, highly flexible, grades A, B & C.	-10 to 155	---	.022 to 1.50 continuous; 1.75 to 2.50 in 4' lengths	M3190/3; UL/CSA	Acrylic coated fiberglass is widely used in motor leads and crossovers, transformer leads, welding equipment, home appliances, electronic circuitry and automotive alternators & starters.
SG-200	silicone rubber coated fiberglass, extremely flexible, flame retardant, grades A, B & C.	-70 to 200	---	.022 to 1.50 continuous; 1-3/4 to 3 in 4' lengths	M3190/6; UL/CSA VW-1	Premium insulation of motor, generator and appliance leads, along with electrical components such as transformers, relays, coils, etc. found in automotive, marine and aircraft electrical systems.
Expandable Sleeving
PET	polyester braided, general purpose, flexible, lightweight	-70 to 125	---	.125 to 2.50	UL/CSA; Ford E8ZB-18K459-AA; Chrysler 4414566	Ideal for encasing and protecting wire harnesses, cable assemblies and industrial hoses in various marine, aerospace, commercial and automotive applications.
PETFR	polyester braided, flame retardant, flexible, lightweight	-70 to 125	---	.125 to 2.50	UL/CSA VW-1	Suitable for industrial, commercial and military applications where a flame retardant protective oversleeve is required. Sleeving is UL recognized for use up to 125°C.
NYLON	nylon braided, tough, excellent chemical resistance	-60 to 160	---	.125 to 2.50	UL; ASTM D876	Resistance to most oils, salt water, fuel, cleaners, solvents and chemicals make it ideal for use in machine tool, automotive equipment and robotics applications.
HALAR	halar braided, flame retardant, tough, abrasion resistant	-70 to 150	---	.125 to 2.50	UL VW-1	Excellent flame and fluid resistance along with extended operation temperature, make it reliable for military and aeronautical applications for bundling wires, cables and hoses.
Slit Corrugated Conduit
PE	slit or unslit, good abrasion, fluid and chemical resistance	-40 to 93	---	.125 to 2	Available in Packard Spec	Designed to protect wire harnesses from continuous abrasion and vibrational wear, it is used in automotive, truck, RV, marine, computer/electronics and telecommunication applications.
PE-FR	slit or unslit, good abrasion, fluid and chemical resistance, self-extinguishing	-40 to 93	---	.125 to 2	Available in Ford Spec or UL-94	Designed to protect wire harnesses from continuous abrasion and vibrational wear, it is used in automotive, truck, RV, marine, computer/electronics and telecommunication applications.
Nylon	slit or unslit, excellent abrasion, fluid and chemical resistance, high temperature	-40 to 149	---	.125 to 2	Available in Packard, Ford, GM and Chrysler Spec or UL-94	Designed to protect wire harnesses from continuous abrasion and vibrational wear. High temperature rating for under-hood applications in the automotive, truck, RV and marine industries.
Poly-propylene	slit or unslit, excellent abrasion, fluid and chemical resistance, self-extinguishing	-40 to 135	---	.125 to 2	Available in Packard and Chrysler Spec or UL-94	Designed to protect wire harnesses from continuous abrasion and vibrational wear, it is used in automotive, truck, RV, marine, computer/electronics and telecommunication applications.

Wire and Cable

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Wire
High performance
Spec 44	dual wall construction, medium temperature, light weight, chemical resistant, highly flame retardant	-65 to 150	---	#30 to #8	Mil-W-81044; NEMA-WC-27500; 600v, 1000v & 2500v rated	Originally developed for aerospace and military applications, Spec 44 wire is now used in commercial and military electronics, avionics, satellites, aircraft, ships and trains.
Spec 55	single and dual wall construction, high temperature, ultra light weight, chemical resistant	-65 to 200	---	#30 to #8	Mil-W-22759/32-35 & /41-46; NEMA-WC-27500; 450v & 600v rated	Designed as airframe wire for Boeing, it also has a wide range of commercial and defense aerospace applications.
Commercial
FlexLite DW	UL style 3584, dual wall primary wire, chemical resistant	-45 to 125	---	#28 to #4	UL/CSA VW-1; 600v rated	A high performance non melting insulation suitable for a variety of applications, especially those with occasional high temperature excursions, such as high power battery operated devices or intermittent duty motors or heating elements.
FlexLite TW	UL style 10208, thin wall, light weight, small size	-55 to 135	---	#32 to #10	UL/CSA VW-1; 600v rated	Used in applications that demand smaller, more rugged components, often in elevated temperatures. Designed to offer reduced size while maintaining superior mechanical performance.
FlexLite MT	UL style 10916, medium temperature, chemical resistance	-55 to 150	---	#26 to #6	UL/CSA VW-1; 600v rated	General purpose wire for appliance, electronics and electrical equipment that require 150°C and 600 volt ratings.
FlexLite HT	UL style 3557, high temperature, thin wall	-55 to 200	---	#26 to #6	UL/CSA VW-1; 600v rated	Product of choice for high temperature applications, offers shop handling advantages over silicone/fiberglass constructions and is cost competitive with other fluoropolymer wire. Applications include halogen lights and small appliances.
FlexLite TX	UL style 10297, very high temperature, chemical resistant	-65 to 250	---	#28 to #4	UL/CSA VW-1; 600v rated	UL recognized hookup wire for lighting fixtures, appliance, wiring and industrial applications requiring a 250°C rated wire.

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Cable
Data Bus
SAE J1939	Twisted pair, SAE J1939 compliant, very flexible, small size	-55 to 135	---	#21 TO #18	SAE J1939/11 & /15	Data Bus cable is primarily used to network trucks, buses, fire engines, military vehicles and earth moving equipment.
Coaxial
Cheminax	Small, lightweight highly flexible coaxial cables. Impedance range: 50 ohms to 125 ohms	-65 to 200	---	#30 to #12	Raychem 1200	Cheminax controlled electrical cables are used in aircraft and aerospace. Also used in radio frequency and microwave systems, computers, security systems and communications.
Multiconductor
Multicore	Custom designed, small size, lightweight, high performance multiconductor cables	-55 to 260	---	#30 to #4	Def. Stan. 61-12 Pt25, VG 95218 Pts 27 and 28	Aerospace, commercial marine, naval, mass transportation, automotive, offshore, military ground vehicle, instrumentation industrial and commercial markets.
Power Cables
Type TR, ZHI, FTR, AFR, ZHPCG	Flexible, chemical & solvent resistant, lightweight, resistance to abrasion and cut-through	-55 to 125	---	1.5mm to 400mm	Def. Stan. 61-12 Part 31, BWB VG 95218 Types G, H and K	Mass transit, offshore industries and marine.

SolderSleeves and Devices

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Solder Sleeves & Devices
CWT-9000X	One piece design, solder connection, strain relief, encapsulation	125	---	#26 to #10	UL & CUL	Wire to wire splicing, splashproof.
D-110, D-1744	One piece design, solder connection, strain relief, encapsulation	150	---	#26 to #10	UL & CUL	Wire to wire splicing, D-110 splashproof, D-1744 Immersion sealed.
SGRP, SGRS	Soldergrip closed end connection splices. Coil and solder connection, adhesive lined	125	---	#18 to #10	UL & CUL	Electrical termination of multiple wire combinations. Environmental protection. Terminate as many as 10 wires of different sizes and types.
D-406	DuraSeal crimp splices. Nylon insulated, strain relief, adhesive lined	125	---	#22 to #10	UL & CUL	Wire to wire splicing. Environmental protection. Used on automotive and truck wiring repair, marine, appliance and commercial wiring.
C-203	PolyCrimp wire splices. Polyethylene insulated, strain relief, adhesive lined	125	---	#22 to #10	D5203	Wire to wire splicing. Environmental protection. Used in Marine, telecom, alarms, traffic light junction boxes and commercial wiring.
D-436	MiniSeal crimp splices. Two piece design. Small size, lightweight, adhesive lined, most environment resistant splices	150	---	#28 to #12	Mil-S-81824/1	Wire to wire splicing. Immersion resistant. Used in a wide variety of aerospace and defense applications.
B-106	DuraSeal crimp terminals and disconnects. Nylon insulated, strain relief, adhesive lined	125	---	#22 to #10	UL & CUL	Wire to terminal connections. Environmental protection. Connect fork, ring, push-on, tab, pin and bullet terminals. Used on automotive, truck, marine, appliance and commercial wiring.
CWT-15XX	SolderSleeve wire terminators. One piece design, provides encapsulation, strain relief and insulation	125	---	#24 to # 16	UL & CUL	Used for terminating wires to component terminals, such as connector pins, motor tabs and switch terminals.
D-129, D-141, D-71X	SolderSleeve wire terminators. One piece design, provides encapsulation, strain relief and insulation	150	---	#30 to # 20	UL & CUL	Used for terminating wires to component terminals, such as connector pins, motor tabs and switch terminals.
CWT-X	SolderSleeve shield terminators. One piece design, provides encapsulation, strain relief and insulation. Optional preinstalled ground leads	125	---	.035" to .276"	D-5023	Used for shield to ground termination. Splash resistant.
S01, S02, M83519, SO63	SolderSleeve shield terminators. One piece design, provides encapsulation, strain relief and insulation. Optional preinstalled ground leads	150	---	.035 to .170	NAS 1747, Mil-S-83519/1&2	Used for shield to ground termination. Immersion resistant.
CWT, B-02X / B-04X, D-181, D-184	SolderSleeve coaxial cable terminators. One and two piece design, provides encapsulation, strain relief and insulation. Preinstalled termination leads.	125 and 150	---	.032 to .130		Used for terminating coaxial cable to component terminals, contacts, printed circuit boards and solderless wrap terminals.
D-150	SolderShield cable splices. One piece design, provides encapsulation, strain relief and insulation.	150	---	.118 to .353	M81824 (conductor splice only)	Used for multiconductor and coaxial cable to cable splicing. Eliminates EMI problems at the splice and provides strain relief for the cable.
D-602	SolderTacts shielded contacts. One piece design. Termination for coax cables, shielded wires, triaxial cables.	150	---	#30 to # 24	D-6002	SolderTacts are used with circular and rectangular connectors in aerospace, instrumentation and computer applications.

Cable Ties

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Nylon 6/6	Standard cable ties for indoor use. Tough, resistant to abrasion and chemicals.	-40 to 85	---	4" to 34"	MS-3367, UL94 class V2	Used in electrical, electronic, telecommunication, packaging retail applications
Weather Resistant	Black, ultraviolet light resistant. Primarily for outdoor applications.	-40 to 80	---	4" to 34"	MS-3367, UL94 class V2	Outdoor applications including transportation, cable TV, HVAC systems .
Heat Stabilized	Used for higher temperature applications.	-40 to 105	---	4" to 28"	UL94 class V2	Higher temperature applications. Electrical, electronic and HVAC systems.

Marking Systems

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Thermal Transfer Markers
TMS-SCE	Military grade heat shrinkable identification sleeves. Made from durable, flame retardant polyolefin. Marking by computer driven thermal transfer printer	-55 to 135	2:1 and 3:1	.093 to 2.25	23053/5, Cl. 1 & 3; UL/CSA VW-1 Printing: SAE AS81531, Mil-Std-202F	Used in marine, rail, military, aerospace and commercial electronics applications.
CM-SCE	Markers are flat, rigid, non-adhesive labels for large diameter cables and wire bundles. Applied with cable ties. Resistant to abrasion, fluids and solvents	-55 to 135	---	1/4 and 1/2	Printing: SAE AS81531, Mil-Std-202F	Side entry provides access to large wire bundles. Used in marine, rail, military and aerospace applications.
RPS	Commercial grade heat shrinkable identification sleeves. Good chemical and solvent resistance. Marking by computer driven thermal transfer printer.	-30 to 105	3:1	.125 to 1.50	UL/CSA          Printing: SAE AS81531, Mil-Std-202F	Used in computers, electronics, automotive, industrial and telecommunication applications.
Hot Stamping
Polyolefin	Custom heat shrinkable printed pieces. Made from flexible, flame retardant general purpose polyolefin.	-55 to 135	2:1 and 3:1	.046 to 4.00	23053/5, Cl. 1 & 2; UL/CSA Printing: SAE AS81531, Mil-Std-130	Logos, part numbers, date codes and serial numbers can be printed on one side or both sides. Print sizes in 1/16" to 1/2" in a variety of colors. Used in military, aerospace, electronics and industrial applications.
HS-PVC	Custom heat shrinkable printed pieces. Made from flexible, flame retardant PVC.	-30 to 105	2:1	.046 to 4.00	23053/2, Cl. 2; UL/CSA VW-1 Printing: SAE AS81531, Mil-Std-130	Logos, part numbers, date codes and serial numbers can be printed on one side or both sides. Print sizes in 1/16" to 1/2" in a variety of colors. Used in telecommunications, electronics and industrial applications.
Pressure Sensitive Labels
SB	Self-laminating label manufactured in vinyl film with a white coated area for printing and a clear section to wrap around and protect the printed surface.	-54 to 82	---	.50 x 1.00 to 2.00 x 7.437	UL/CSA TTDS-052	Self-laminating feature protects printed area from oil, solvents, water and abrasion. Conforms to round, irregular or flexible surfaces. Ideal for wire and cable identification. Used in computers, electronics, telecommunications and industrial applications.
SP	Self-laminating label manufactured in a polyester film with a white coated area for printing and a clear section to wrap around and protect the printed surface.	-40 to 150	---	.50 x 1.00 to 2.00 x 3.75		Self-laminating feature protects printed area from oil, solvents, water and abrasion. Conforms to round, irregular or flexible surfaces. Low profile design to better conform to wires and cables. Used in computers, electronics, telecommunications and industrial applications.
PVF	Self-laminating label manufactured in a tedlar film with a white coated area for printing and a clear section to wrap around and protect the printed surface.	-40 to 105	---	.50 x 1.00 to 2.00 x 7.437	Self-extinguishing, TTDS-111	Self-laminating feature protects printed area from oil, solvents, water and abrasion. Self-extinguishing and filters UV light. Low profile design to better conform to wires and cables. Used in computers, electronics, telecommunications and industrial applications.
EP	Paper label with permanent adhesive. Remains bonded permanently to most surfaces and typically results in label or substrate tear when removed.	-54 to 66	---	.750 x .250 to 4.00 x 6.50		Thermal transfer printable, aggressive adhesive for bonding to corrugated, films and plastic material for labeling in mild environments. Excellent for bar coding applications.
WP	White polyester labels with permanent acrylic adhesive. Resistant to solvents.	-40 to 150	---	.157 x .157 to 4.00 x 6.50	UL/CSA	Thermal transfer printable, ideal for bar coding, PCB and component labeling as well as general purpose labeling. Also used in electronics, aerospace and industrial applications.
MP	Metalized polyester labels with permanent acrylic adhesive. Metalized appearance.	-40 to 150	---	.157 x .160 to 4.00 x 6.50	UL/CSA	Thermal transfer printable, designed for rating plates, nameplates, equipment labels, serial number plates and product information labels. Used in electronics, components and industrial applications.
TN	Tamper proof destructible polyethylene label designed to fracture upon removal.	-40 to 80	---	.157 x .157 to 4.00 x 6.50	TTDS-089	Thermal transfer printable, it is ideal for serial number labels, calibration information labeling or other tamper proof applications.
WV	White vinyl labels with permanent acrylic adhesive. Resistant to oil mild solvents, water and outdoor exposure.	-60 to 95	---	.157 x .157 to 4.00 x 6.50	TTDS-090	Thermal transfer printable. Conforms to round, irregular or flexible surfaces and is ideal for wire and cable identification, including flat ribbon cables.
NC	Flexible nylon cloth with a permanent acrylic adhesive. Not recommended for outdoor use or immersion in liquid.	-40 to 140	---	.250 x .250 to 2.06 x 3.31	TTDS-051	Thermal transfer printable. Conforms to irregular or curved surfaces and is ideal for wire and cable identification.

Adhesive Systems

Product	Description	Operating Temp. (°C)	Shrink Ratio	Size Range (inch)	Specifications	Applications	Data Sheet
Instant Adhesives (Cyanoacrylates)
RP Series	Rubber and plastic bonding. Complete range of viscosities and cure times.	-54 to 93	---	---	Mil-A-46050C	General purpose bonding of rubber and plastic parts.
M Series	Metal bonding. Complete range of viscosities and cure times.	-65 to 93	---	---	Mil-A-46050C	Bonding metal to itself or to other substrates.
SI Series	Surface insensitive bonding. Exceptionally fast cure speeds, difficult to bond surfaces and acidic surfaces. Complete range of viscosities and cure times.	-54 to 93	---	---	Mil-A-46050C	Surface insensitive materials wood include: wood, PVC, substrates that contain plasticizers and certain types of EPDM. Excellent for almost all surfaces.
HT Series	High temperature cyanoacrylates with extended operation at elevated temperatures	-51 to 135	---	---	Mil-A-46050C	Ideal for applications that have a high degree of temperature cycling and/or extended temperature requirements
MG Series	Medical grade instant adhesives. USP Class VI certified	-54 to 93	---	---	Mil-A-46050C, USP Class VI	Used in assembling of medical devices requiring USP Class VI certification
Threadlockers, Sealers and Gasketing (Anaerobics)
TL Series	Threadlockers prevent against vibration loosening while locking and sealing thread assemblies. Excellent resistance to harsh environments	-51 to 177	---	---	Mil-S-46163	Threadlockers distribute the load on a fastener over the entire engagement length of the assembly, reducing fastener and material fatigue. Used in a wide range of applications, from electronic devices to heavy industrial equipment.
PS Series	Threadsealers seal and secure metal pipes and fittings by filling the space between threaded metal parts. Resistance to fluids, oils, fuels, lubricants, etc. Full range of viscosities and strengths	-51 to 177	---	---		Threadsealers instantly seal to moderate pressures and when fully cured, they seal to the burst strength of most piping systems. Designed for both high pressure and low pressure applications. Applications include high pressure fluid, refrigerant, pneumatic air, steam, gas and liquid systems.
GM Series	Gasketing allows maximum clamp loading and sealing of mating flanges and housings. Exceptional pressure, chemical and solvent resistance. Full range of strengths, cure times and viscosities.	-54 to 177	---	---		They create a formed in place gasket, eliminating the need for large inventories of pre cut gaskets. Ideally suited for applications where there are small gaps on rigid metal to metal assemblies.
Structural Adhesives
MP 5200 Series	No-mix structurals, provides structure bonding to a wide range of similar and dissimilar substrates. Excellent tensile, shear, and peel strength. Durable bonding with good aging and weathering properties.	-54 to 191	---	---		The adhesive is applied to one surface, the activator to the other and then mate the parts. Developed for applications that require performance in harsh environments.
MP 5300 Series	UV-Curing adhesives are a single component material that cure in seconds when exposed to UV light.	-51 to 177	---	---		Used in a diverse range of assembly applications including; bonding, sealing, coating, tacking, potting and encapsulating often found in the automotive, industrial, electronic, medical industries.
MP 5400 Series	One and two part epoxies. Bonds a wide range of similar and dissimilar materials. Good aging and weathering properties, high temperature, impact and vibration resistance.	-51 to 204	---	---		Superior bond strength and dependable performance make it ideal for structural bonding,potting and ecapsulating applications. Replaces mechanical fastening and has good gap filling charactoristics.
MP 55000 Series	Two part methacrylate adhesive specifically engineered for structural bonding of nearly all thermoplastics, metals and composite material.	-48 to 107	---	---		Excellent for fiberglass to fiberglass, plastic and metal bonding. Provides outstanding performance in a wide range of applications in the transportation, industrial, construction and marine industries.
Sealants
Flex Series	One part silicones have good adhesion and sealing properties and will bond to a wide range of similar and dissimilar materials. They offer maximum flexibility, provide a positive seal and excellent operating temperature range.	-65 to 232	---	---		Flex series silicones are used for assembly applications with many different materials including: glass, ceramics, masonry, wood, painted surfaces, metal and plastics. Popular in the Automotive, appliance, industrial, HVAC, truck and marine industries.